{"id":1645,"date":"2026-11-16T05:55:50","date_gmt":"2026-11-16T05:55:50","guid":{"rendered":"https:\/\/cargopeople.com\/blog\/?p=1645"},"modified":"2026-11-16T05:55:51","modified_gmt":"2026-11-16T05:55:51","slug":"dangerous-goods-import-clearance-india","status":"publish","type":"post","link":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/","title":{"rendered":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">A manufacturer in India was expecting an industrial chemical consignment from China. The material was needed for production, the vessel had arrived on time and the procurement team expected the cargo to move out within two or three days.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On paper, everything looked ready.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The commercial invoice was available. The packing list matched the shipment. The Bill of Lading had been issued correctly. The Customs broker had started preparing the Bill of Entry.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Then the Safety Data Sheet was reviewed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The SDS sent by the supplier related to an older formulation of the same product. The chemical description did not fully match the product description appearing in the commercial documents. The transport paperwork used another generic description.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Customs asked for clarification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The importer contacted the supplier, waited for a corrected SDS and then had the documentation aligned again. Three days were lost.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If storage and detention exposure is assumed at an illustrative \u20b910,000 per day, the three-day delay alone creates around \u20b930,000 in additional cost. Add document amendment, Customs-broker coordination and DG truck rescheduling, and the direct logistics impact can move closer to \u20b950,000.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cargo was not delayed because dangerous goods automatically take longer to clear.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It was delayed because the technical, commercial and Customs documentation did not describe the cargo consistently.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is one of the most common problems in dangerous goods import clearance in India.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG cargo passes through more compliance layers than ordinary general cargo. Customs wants accurate tariff and product information. The airline or shipping line needs correct dangerous-goods classification. The terminal may have its own handling rules. The importer may also need product-specific Indian approvals.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When even one part of that chain is incomplete, the shipment can stop.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"> Why Does DG Import Clearance Get Delayed?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong><a href=\"https:\/\/cargopeople.com\/blog\/dangerous-goods-packing-india\/\">Dangerous goods imports<\/a><\/strong> usually get delayed because of incorrect SDS information, wrong UN classification, incomplete carrier approval, Customs classification questions, missing product-specific permissions or poor coordination between the port, Customs broker and DG transporter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A straightforward import may sometimes clear within about 24 to 72 hours after complete documentation and cargo availability. However, DG shipments can move beyond that range if technical or regulatory issues arise.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Current Customs performance data also shows that clearance varies significantly depending on cargo mode and importer profile. In 2026, the average import release time at JNCH was around 65 hours 53 minutes, while AEO consignments averaged about 40 hours 40 minutes and non-AEO cargo averaged roughly 76 hours 59 minutes.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For importers, the practical lesson is simple: most avoidable DG delays should be solved before the cargo leaves origin.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why Dangerous Goods Imports Are More Sensitive to Delays<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ordinary cargo can already face Customs questions related to HS classification, valuation, origin, import policy or documentation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Dangerous goods add another technical layer.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The importer may also need to confirm the UN number, proper shipping name, hazard class, packing group, SDS details, packaging method and carrier acceptance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">These requirements are interconnected.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A Customs classification can be correct while the dangerous-goods classification is wrong. An SDS can be technically correct but belong to another formulation. A shipping line may reject cargo even though the import itself is legally permitted.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is why DG logistics should never be divided into separate boxes called &#8220;freight&#8221; and &#8220;Customs.&#8221;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The shipment should be managed as one process from supplier documentation to final delivery.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How Long Does Dangerous Goods Import Clearance Take in India?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">There is no single DG clearance time that applies to every shipment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The 2026 JNCH Time Release Study reported an average import release time of approximately 65 hours 53 minutes, compared with 72 hours 52 minutes in 2025.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is an improvement of roughly 9.6%.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The same study showed a much faster average for AEO consignments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">AEO cargo averaged approximately:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">40 hours 40 minutes<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Non-AEO cargo averaged:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">76 hours 59 minutes<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The difference was more than 36 hours.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This does not mean AEO status removes DG documentation or regulatory obligations. It simply shows that importer profile and Customs facilitation can influence release performance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Another 2026 Customs performance snapshot showed approximately 89% of air imports, 51% of sea imports and 26% of ICD imports receiving Out of Charge within 48 hours.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For a decision-maker, these numbers are useful because they show that &#8220;24-72 hours&#8221; is not one universal rule.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Air cargo can move very quickly when documentation is correct. Sea cargo and ICD movements can take longer. DG shipments may need additional time for technical clarification, examination or product-specific approvals.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 1: Incorrect or Outdated Safety Data Sheet<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The Safety Data Sheet is one of the first documents that should be reviewed for a dangerous-goods shipment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The problem is often not that the importer has no SDS.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The problem is that the wrong SDS is being used.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The supplier may send a document for an older formulation, a different concentration, another product grade or a different manufacturing location.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That can create problems if the commercial documents describe one product while the SDS suggests another technical identity.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Commercial invoice: Industrial Solvent A<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">SDS: Flammable Mixture B<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bill of Lading: Chemical Product<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Bill of Entry: Industrial Cleaning Preparation<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">All four descriptions might refer to the same commercial product, but Customs cannot be expected to assume that automatically.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The importer should be able to show a clear technical relationship between them.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The correct approach is to review the SDS before the cargo is booked.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Case Study 1: A Three-Day SDS Delay Costs \u20b950,000<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">An Indian manufacturer imported chemical raw material from China.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cargo arrived on time, but the SDS referred to an older product formulation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The overseas supplier took three days to provide the correct version.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Assume illustrative storage and detention exposure of:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b910,000 per day<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Three days of delay:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b930,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Document amendment and coordination:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b95,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG transporter rescheduling:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b915,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Total direct logistics impact:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b950,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This figure does not include production loss.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the material is feeding an active manufacturing line, one day of production disruption may cost more than the freight delay itself.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 2: Wrong UN Number or DG Classification<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">One of the biggest DG mistakes is confusing the HS code with the UN number.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The HS code is used for Customs tariff classification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The UN number is used for dangerous-goods transport classification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">They answer different questions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A shipment may have the correct HS code but still use the wrong UN number.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If that happens, the consequences can include revised DG documentation, relabelling, repacking, carrier reapproval or even a missed vessel or flight.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The classification should therefore confirm:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>UN number<\/li>\n\n\n\n<li>proper shipping name<\/li>\n\n\n\n<li>hazard class<\/li>\n\n\n\n<li>packing group where applicable<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">These details should come from technically reliable product information rather than from the commercial product name alone.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Lithium Batteries Show Why Correct Classification Matters<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lithium-ion batteries are a good example because small changes in the shipment configuration can change the transport requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Standalone lithium-ion batteries are commonly classified under UN 3480.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Current air-transport requirements generally restrict standalone UN 3480 batteries to cargo aircraft and require a maximum 30% state of charge, subject to applicable exceptions and approvals.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Some configurations also carry package limits.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For example, certain PI 965 Section IA shipments can have a maximum of 35 kg per package on cargo aircraft, while Section IB can have a 10 kg per package limit.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is why an importer cannot simply decide to move batteries by air because the cargo is urgent.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The exact classification and packaging determine whether the shipment can be accepted.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 3: Carrier Approval Comes Too Late<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A common operational mistake is to confirm freight space first and DG acceptance later.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For dangerous goods, the sequence should usually be the opposite.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The forwarder should confirm carrier acceptance before the shipment reaches the port or airport.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The carrier may request:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">SDS,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG declaration,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">UN number,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">proper shipping name,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">UN 38.3 documentation for applicable batteries,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">special-provision evidence,<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">or packaging details.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the approval is still pending when the vessel or airline cut-off arrives, the shipment can be rolled to the next departure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For urgent industrial cargo, that can mean three, five or even more days of additional lead time before the shipment has left origin.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Case Study 2: Battery Shipment Rejected Before Departure<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">An importer needed lithium-ion batteries urgently for production.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Air freight was selected because the goods were time-sensitive.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The supplier sent the invoice, packing list and SDS.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">However, acceptable UN 38.3 support was not immediately available.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The airline did not approve the shipment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cargo remained at origin.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">No Indian Customs delay had occurred, but the importer was already late.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The lesson is important.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG import clearance starts before Indian Customs becomes involved.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the cargo cannot pass carrier acceptance, the supply chain has already failed at the first stage.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 4: Carrier-Specific Rules Are Missed<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Carrier requirements can be stricter than the minimum transport rules.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This has become particularly important with lithium batteries.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Some shipping lines now require lithium battery cargo to be declared even where the shipper believes the cargo qualifies under a special provision.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Carrier requirements can include recent SDS documents, UN 38.3 evidence, packaging information and even photographs taken during container stuffing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">One major carrier&#8217;s current India policy states a USD 15,000 per-container penalty for undeclared lithium-ion battery cargo treated as a DG misdeclaration under its own conditions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is not an Indian Customs penalty.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is also not a universal industry charge.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But it shows the financial risk of treating dangerous-goods declaration as a minor paperwork issue.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 5: Customs Description and HS Code Do Not Align<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A DG shipment can also be delayed because the Customs classification does not appear consistent with the technical documents.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Customs may ask for technical literature, product composition, end-use information or manufacturer clarification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Suppose the Bill of Entry describes a product as a general chemical preparation, while the SDS identifies it as a specific flammable liquid mixture.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That does not automatically make the Customs classification incorrect.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But it may require explanation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The best approach is to review the HS classification and the DG classification separately, then make sure the two descriptions are logically consistent.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This reduces unnecessary assessment queries.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 6: Indian Product Approval Was Not Checked Before Shipment<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Dangerous-goods classification alone does not tell an importer whether the product requires another Indian approval.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Depending on the commodity, regulatory checks may involve DGFT, PESO, BIS, CPCB\/EPR or another Partner Government Agency.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Not every dangerous good requires all of these.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The requirement depends on the exact product, HS code and intended use.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The problem arises when the importer checks these requirements only after the cargo has arrived.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At that point, storage costs are already running.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Product-specific Indian compliance should therefore be reviewed before the shipment is released by the supplier.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Case Study 3: Five-Day Compliance Hold Costs \u20b990,000<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">An importer brings regulated industrial material into India.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Bill of Entry is filed, but a product-specific compliance requirement becomes an issue during clearance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cargo remains at the terminal for five additional days.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Assume illustrative terminal and detention exposure of:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b912,000 per day<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Five days:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b960,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG truck rescheduling:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b920,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Document and broker coordination:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b910,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Total direct logistics exposure:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b990,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Again, this excludes lost production.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For a manufacturer waiting for critical raw material, the indirect cost can easily exceed the physical logistics bill.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 7: Customs Examination or Technical Verification<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not every dangerous-goods shipment is physically examined.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Customs examination is risk-based.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A shipment may be facilitated through the normal Risk Management System or selected for examination, scanning, sampling or additional technical verification.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Hazardous chemicals may sometimes require more information on composition or end use.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If samples need to be drawn for testing, the release timeline can extend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is why a fixed &#8220;10-20% inspection rate&#8221; should not be presented as a universal DG statistic.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The treatment of a shipment can depend on the importer profile, commodity, HS classification, documentation and regulatory controls.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Importers should plan some contingency time rather than assume that every DG shipment will follow exactly the same process.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Delay 8: Out of Charge Is Granted but the Cargo Still Does Not Move<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Out of Charge is an important Customs milestone.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But it is not the same as final delivery.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">After Customs clearance, the importer may still need carrier release, terminal clearance, DG handling settlement, container availability and a suitable transporter.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If the truck is not ready, the cargo can remain at the terminal after Customs has already finished its part.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This creates an important performance distinction.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Businesses should track not only Customs release time but also total port-to-factory movement time.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is the number that affects production planning.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Case Study 4: DG Truck Not Available After Clearance<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A DG shipment was expected to receive Out of Charge on Wednesday.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The importer had arranged a DG-compliant vehicle for Wednesday afternoon.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A Customs query moved release to Friday.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The original vehicle was no longer available.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A replacement DG vehicle cost an additional:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b920,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Two extra days of terminal exposure at an illustrative:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b910,000 per day<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">added another:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b920,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Total direct impact:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b940,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The Customs query itself did not create a direct fee.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cost came from everything around it.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Does a DG Import Delay Actually Cost?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For dangerous goods, delay cost is rarely one simple demurrage line.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It can include terminal storage, container detention, additional DG handling, document amendment, carrier administration, truck rescheduling, relabelling, rebooking and emergency replacement freight.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Delay Cost<\/th><th>Typical Reason<\/th><\/tr><tr><td>Terminal Storage<\/td><td>Cargo remains beyond free period<\/td><\/tr><tr><td>Detention<\/td><td>Container retained longer<\/td><\/tr><tr><td>DG Handling<\/td><td>Special hazardous cargo procedures<\/td><\/tr><tr><td>Document Amendment<\/td><td>Incorrect declaration<\/td><\/tr><tr><td>Carrier Administration<\/td><td>DG reapproval<\/td><\/tr><tr><td>Truck Rescheduling<\/td><td>Clearance date changes<\/td><\/tr><tr><td>Repacking \/ Relabelling<\/td><td>DG preparation incorrect<\/td><\/tr><tr><td>Rebooking<\/td><td>Vessel or flight missed<\/td><\/tr><tr><td>Expedited Freight<\/td><td>Replacement cargo becomes urgent<\/td><\/tr><tr><td>Production Loss<\/td><td>Material reaches factory late<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">A broad \u20b97,000 to \u20b915,000 per day range can be useful only as a planning illustration for storage or detention.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Actual DG charges can be lower or substantially higher depending on the port, airport, carrier, cargo class, container type, free time and duration.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How a Three-Day Delay Can Become \u20b950,000<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Take a simple example.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Storage and detention:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b910,000 x 3 days = \u20b930,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Document correction:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b95,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">DG transporter rescheduling:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b915,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Total:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b950,000<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For a \u20b925 lakh cargo shipment, \u20b950,000 may appear manageable.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But if the same shipment is feeding a manufacturing line worth several lakhs of rupees per day in output, the real business impact is very different.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This is why DG clearance should be managed as a supply-chain risk rather than just a Customs task.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How to Avoid DG Import Delays Before Shipment<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The best way to reduce DG delays is to move the compliance work earlier.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">7-10 Days Before Shipment<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Confirm the exact product identity, HS code, SDS, UN number, DG class and any applicable Indian regulatory requirement.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5-7 Days Before Shipment<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Submit technical and DG documents to the airline or shipping line and obtain acceptance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Do not assume approval simply because the same product moved on another carrier previously.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2-3 Days Before Departure<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Compare the invoice, packing list, DG declaration and Bill of Lading or AWB instructions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Make sure product descriptions are consistent.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Before Arrival in India<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Prepare the Bill of Entry data and all supporting documents.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Resolve likely classification or regulatory questions wherever possible before arrival.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Before Customs Release<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Confirm DG transporter availability, terminal procedures and consignee delivery readiness.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This prevents the cargo from sitting at the terminal after Out of Charge.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Air Freight vs Sea Freight for Dangerous Goods<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/cargopeople.com\/blog\/air-freight-forwarder-delhi-airport\/\"><strong>Air freight<\/strong> <\/a>is usually faster, but dangerous goods only benefit from that speed if the airline accepts the shipment correctly.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An air shipment rejected because of the wrong classification, packaging or documentation can lose the entire time advantage.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Air freight is therefore generally more suitable for urgent, smaller and high-value DG cargo that meets airline requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Sea freight is often more practical for larger industrial quantities.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It may offer more flexibility for volume, but the cargo still needs correct IMDG classification, carrier approval and port acceptance.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>Factor<\/th><th>DG Air Freight<\/th><th>DG Sea Freight<\/th><\/tr><tr><td>Transit<\/td><td>Faster<\/td><td>Longer<\/td><\/tr><tr><td>Acceptance<\/td><td>Usually stricter<\/td><td>Often more practical for volume<\/td><\/tr><tr><td>Main Framework<\/td><td>IATA DGR<\/td><td>IMDG<\/td><\/tr><tr><td>Main Delay Risk<\/td><td>Airline rejection\/cut-off<\/td><td>Carrier\/terminal approval<\/td><\/tr><tr><td>Best For<\/td><td>Urgent, smaller DG cargo<\/td><td>Larger industrial quantities<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The right mode should therefore be selected after DG classification and carrier review, not before.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Regular DG Importers Should Measure<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Companies that import chemicals, batteries or other dangerous goods every month should track more than freight rate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A useful KPI dashboard can include:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>KPI<\/th><th>What It Shows<\/th><\/tr><tr><td>Carrier DG Approval Time<\/td><td>Pre-shipment readiness<\/td><\/tr><tr><td>First-Time Document Acceptance<\/td><td>Documentation quality<\/td><\/tr><tr><td>Customs Release Hours<\/td><td>Clearance efficiency<\/td><\/tr><tr><td>Storage Days<\/td><td>Delay exposure<\/td><\/tr><tr><td>DG Booking Rejection Rate<\/td><td>Classification quality<\/td><\/tr><tr><td>Truck Rescheduling Rate<\/td><td>Destination planning<\/td><\/tr><tr><td>Door-to-Door Transit Time<\/td><td>Overall supply-chain reliability<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The financial impact can become meaningful.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Suppose a company imports 20 DG shipments per month.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If better documentation eliminates just one unnecessary storage day per shipment and the illustrative exposure is \u20b910,000 per day:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">20 x \u20b910,000 = \u20b92 lakh per month<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Over 12 months:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u20b924 lakh<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is why disciplined DG documentation can create measurable commercial savings.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Role of a Freight Forwarder in Preventing DG Delays<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A freight forwarder&#8217;s role should start before the booking is made.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For air freight, this means checking airline acceptance, dangerous-goods documentation and airport cut-offs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For sea freight, it includes shipping-line approval, IMDG documentation, equipment planning and terminal coordination.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For Customs clearance, the Bill of Entry should align with the commercial and technical documentation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Door-to-door delivery then connects Customs release with compliant inland transportation.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Warehousing may be required when approved DG storage is needed.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Project cargo coordination can also become relevant where dangerous goods form part of a larger industrial shipment.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Cargo People&#8217;s air freight, sea freight FCL\/LCL, Customs clearance, door-to-door delivery, warehousing and project cargo capabilities can therefore be coordinated as one movement rather than treated as separate services.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For importers, the main objective is simple:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">reduce the number of points where documentation changes hands without being checked.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Practical Decision Guide for Importers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before a DG shipment leaves origin, management should be able to answer five questions confidently.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Is the SDS for the exact product being shipped?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Is the UN number and DG classification correct?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Has the airline or shipping line approved the cargo?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Have Indian product-specific requirements been checked?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Is destination DG transport already planned?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If one answer is unclear, the shipment is not fully ready.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Holding cargo at the supplier for one extra day to correct a document is often far cheaper than discovering the same error after arrival in India.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Conclusion<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Dangerous goods import clearance in India gets delayed for reasons that extend far beyond Customs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An outdated SDS, wrong UN number, late carrier approval, incorrect HS code, missing product approval or poor destination planning can each turn a routine clearance into several days of storage and disruption.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Current 2026 Customs data shows that Indian import clearance performance is improving. Average release time at JNCH was around 65 hours 53 minutes, while AEO cargo averaged approximately 40 hours 40 minutes and non-AEO cargo nearly 77 hours.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">But importers should focus less on the average and more on the preventable exceptions.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A three-day documentation issue can create around \u20b950,000 in illustrative direct logistics exposure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A five-day compliance hold can reach around \u20b990,000.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A serious DG misdeclaration can create much greater exposure, with one current carrier example stating a penalty of USD 15,000 per container for undeclared lithium-ion battery cargo under its own terms.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Most of these problems are cheaper to solve before cargo departure.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The strongest DG import strategy is therefore to align the SDS,<strong> <a href=\"https:\/\/cargopeople.com\/blog\/tag\/hs-code-classification\/\">HS classification<\/a><\/strong>, UN number, carrier approval, Indian regulatory requirements, Customs filing and destination delivery plan before the shipment leaves origin.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is what reduces storage, avoids rebooking and keeps critical industrial cargo moving toward the factory instead of waiting at the port or airport.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">\ud83d\udcde Get Expert Logistics Support<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcde +91 97174 65454<br>\ud83d\udce7 <a href=\"mailto:wecare@cargopeople.com\">wecare@cargopeople.com<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udc49<strong><a href=\"https:\/\/cargopeople.com\/contact.php\"> Get a Shipping Quote from Cargo People Logistics<\/a><\/strong><\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">1. How long does dangerous goods import clearance take in India?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Straightforward shipments may sometimes clear within approximately 24-72 hours after complete documentation and cargo availability, but DG, Customs or regulatory issues can extend the timeline.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. What are the most common DG import delays?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Common causes include outdated SDS documents, wrong UN classification, late carrier approval, HS code queries, missing product approvals and poor transporter coordination.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. Does every DG shipment undergo physical examination?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. Customs examination is risk-based and can depend on commodity, importer profile, documentation and regulatory requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">4. Can the wrong SDS delay Customs clearance?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes. If the SDS does not correspond to the imported product or conflicts with the Customs description, additional clarification may be required.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5. Why do lithium battery imports get delayed?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Typical reasons include missing UN 38.3 documentation, incorrect classification, state-of-charge issues, carrier approval and packaging requirements.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>A manufacturer in India was expecting an industrial chemical consignment from China. The material was needed for production, the vessel had arrived on time and the procurement team expected the cargo to move out within two or three days. On paper, everything looked ready. The commercial invoice was available. The packing list matched the shipment. The Bill of Lading had been issued correctly. The Customs broker had started preparing the Bill of Entry. Then the Safety Data Sheet was reviewed. The SDS sent by the supplier related to an older formulation of the same product. The chemical description did not fully match the product description appearing in the commercial documents. The transport paperwork used another generic description. Customs asked for clarification. The importer contacted the supplier, waited for a corrected SDS and then had the documentation aligned again. Three days were lost. If storage and detention exposure is assumed at an illustrative \u20b910,000 per day, the three-day delay alone creates around \u20b930,000 in additional cost. Add document amendment, Customs-broker coordination and DG truck rescheduling, and the direct logistics impact can move closer to \u20b950,000. The cargo was not delayed because dangerous goods automatically take longer to clear. It was delayed because the technical, commercial and Customs documentation did not describe the cargo consistently. That is one of the most common problems in dangerous goods import clearance in India. DG cargo passes through more compliance layers than ordinary general cargo. Customs wants accurate tariff and product information. The airline or shipping line needs correct dangerous-goods classification. The terminal may have its own handling rules. The importer may also need product-specific Indian approvals. When even one part of that chain is incomplete, the shipment can stop. Why Does DG Import Clearance Get Delayed? Dangerous goods imports usually get delayed because of incorrect SDS information, wrong UN classification, incomplete carrier approval, Customs classification questions, missing product-specific permissions or poor coordination between the port, Customs broker and DG transporter. A straightforward import may sometimes clear within about 24 to 72 hours after complete documentation and cargo availability. However, DG shipments can move beyond that range if technical or regulatory issues arise. Current Customs performance data also shows that clearance varies significantly depending on cargo mode and importer profile. In 2026, the average import release time at JNCH was around 65 hours 53 minutes, while AEO consignments averaged about 40 hours 40 minutes and non-AEO cargo averaged roughly 76 hours 59 minutes. For importers, the practical lesson is simple: most avoidable DG delays should be solved before the cargo leaves origin. Why Dangerous Goods Imports Are More Sensitive to Delays Ordinary cargo can already face Customs questions related to HS classification, valuation, origin, import policy or documentation. Dangerous goods add another technical layer. The importer may also need to confirm the UN number, proper shipping name, hazard class, packing group, SDS details, packaging method and carrier acceptance. These requirements are interconnected. A Customs classification can be correct while the dangerous-goods classification is wrong. An SDS can be technically correct but belong to another formulation. A shipping line may reject cargo even though the import itself is legally permitted. This is why DG logistics should never be divided into separate boxes called &#8220;freight&#8221; and &#8220;Customs.&#8221; The shipment should be managed as one process from supplier documentation to final delivery. How Long Does Dangerous Goods Import Clearance Take in India? There is no single DG clearance time that applies to every shipment. The 2026 JNCH Time Release Study reported an average import release time of approximately 65 hours 53 minutes, compared with 72 hours 52 minutes in 2025. That is an improvement of roughly 9.6%. The same study showed a much faster average for AEO consignments. AEO cargo averaged approximately: 40 hours 40 minutes Non-AEO cargo averaged: 76 hours 59 minutes The difference was more than 36 hours. This does not mean AEO status removes DG documentation or regulatory obligations. It simply shows that importer profile and Customs facilitation can influence release performance. Another 2026 Customs performance snapshot showed approximately 89% of air imports, 51% of sea imports and 26% of ICD imports receiving Out of Charge within 48 hours. For a decision-maker, these numbers are useful because they show that &#8220;24-72 hours&#8221; is not one universal rule. Air cargo can move very quickly when documentation is correct. Sea cargo and ICD movements can take longer. DG shipments may need additional time for technical clarification, examination or product-specific approvals. Delay 1: Incorrect or Outdated Safety Data Sheet The Safety Data Sheet is one of the first documents that should be reviewed for a dangerous-goods shipment. The problem is often not that the importer has no SDS. The problem is that the wrong SDS is being used. The supplier may send a document for an older formulation, a different concentration, another product grade or a different manufacturing location. That can create problems if the commercial documents describe one product while the SDS suggests another technical identity. For example: Commercial invoice: Industrial Solvent A SDS: Flammable Mixture B Bill of Lading: Chemical Product Bill of Entry: Industrial Cleaning Preparation All four descriptions might refer to the same commercial product, but Customs cannot be expected to assume that automatically. The importer should be able to show a clear technical relationship between them. The correct approach is to review the SDS before the cargo is booked. Case Study 1: A Three-Day SDS Delay Costs \u20b950,000 An Indian manufacturer imported chemical raw material from China. The cargo arrived on time, but the SDS referred to an older product formulation. The overseas supplier took three days to provide the correct version. Assume illustrative storage and detention exposure of: \u20b910,000 per day Three days of delay: \u20b930,000 Document amendment and coordination: \u20b95,000 DG transporter rescheduling: \u20b915,000 Total direct logistics impact: \u20b950,000 This figure does not include production loss. If the material is feeding an active manufacturing line, one day of production disruption may cost more than the freight delay itself. Delay 2: Wrong UN Number or DG Classification One of the biggest DG mistakes is confusing the HS code with the UN number. The HS code is used for Customs tariff classification. The UN number is used for dangerous-goods transport classification. They answer different questions. A shipment may have the correct HS code but still use the wrong UN number. If that happens, the consequences can include revised DG documentation, relabelling, repacking, carrier reapproval or even a missed vessel or flight. The classification should therefore confirm: These details should come from technically reliable product information rather than from the commercial product name alone. Lithium Batteries Show Why Correct Classification Matters Lithium-ion batteries are a good example because small changes in the shipment configuration can change the transport requirements. Standalone lithium-ion batteries are commonly classified under UN 3480. Current air-transport requirements generally restrict standalone UN 3480 batteries to cargo aircraft and require a maximum 30% state of charge, subject to applicable exceptions and approvals. Some configurations also carry package limits. For example, certain PI 965 Section IA shipments can have a maximum of 35 kg per package on cargo aircraft, while Section IB can have a 10 kg per package limit. That is why an importer cannot simply decide to move batteries by air because the cargo is urgent. The exact classification and packaging determine whether the shipment can be accepted. Delay 3: Carrier Approval Comes Too Late A common operational mistake is to confirm freight space first and DG acceptance later. For dangerous goods, the sequence should usually be the opposite. The forwarder should confirm carrier acceptance before the shipment reaches the port or airport. The carrier may request: SDS, DG declaration, UN number, proper shipping name, UN 38.3 documentation for applicable batteries, special-provision evidence, or packaging details. If the approval is still pending when the vessel or airline cut-off arrives, the shipment can be rolled to the next departure. For urgent industrial cargo, that can mean three, five or even more days of additional lead time before the shipment has left origin. Case Study 2: Battery Shipment Rejected Before Departure An importer needed lithium-ion batteries urgently for production. Air freight was selected because the goods were time-sensitive. The supplier sent the invoice, packing list and SDS. However, acceptable UN 38.3 support was not immediately available. The airline did not approve the shipment. The cargo remained at origin. No Indian Customs delay had occurred, but the importer was already late. The lesson is important. DG import clearance starts before Indian Customs becomes involved. If the cargo cannot pass carrier acceptance, the supply chain has already failed at the first stage. Delay 4: Carrier-Specific Rules Are Missed Carrier requirements can be stricter than the minimum transport rules. This has become particularly important with lithium batteries. Some shipping lines now require lithium battery cargo to be declared even where the shipper believes the cargo qualifies under a special provision. Carrier requirements can include recent SDS documents, UN 38.3 evidence, packaging information and even photographs taken during container stuffing. One major carrier&#8217;s current India policy states a USD 15,000 per-container penalty for undeclared lithium-ion battery cargo treated as a DG misdeclaration under its own conditions. This is not an Indian Customs penalty. It is also not a universal industry charge. But it shows the financial risk of treating dangerous-goods declaration as a minor paperwork issue. Delay 5: Customs Description and HS Code Do Not Align A DG shipment can also be delayed because the Customs classification does not appear consistent with the technical documents. Customs may ask for technical literature, product composition, end-use information or manufacturer clarification. Suppose the Bill of Entry describes a product as a general chemical preparation, while the SDS identifies it as a specific flammable liquid mixture. That does not automatically make the Customs classification incorrect. But it may require explanation. The best approach is to review the HS classification and the DG classification separately, then make sure the two descriptions are logically consistent. This reduces unnecessary assessment queries. Delay 6: Indian Product Approval Was Not Checked Before Shipment Dangerous-goods classification alone does not tell an importer whether the product requires another Indian approval. Depending on the commodity, regulatory checks may involve DGFT, PESO, BIS, CPCB\/EPR or another Partner Government Agency. Not every dangerous good requires all of these. The requirement depends on the exact product, HS code and intended use. The problem arises when the importer checks these requirements only after the cargo has arrived. At that point, storage costs are already running. Product-specific Indian compliance should therefore be reviewed before the shipment is released by the supplier. Case Study 3: Five-Day Compliance Hold Costs \u20b990,000 An importer brings regulated industrial material into India. The Bill of Entry is filed, but a product-specific compliance requirement becomes an issue during clearance. The cargo remains at the terminal for five additional days. Assume illustrative terminal and detention exposure of: \u20b912,000 per day Five days: \u20b960,000 DG truck rescheduling: \u20b920,000 Document and broker coordination: \u20b910,000 Total direct logistics exposure: \u20b990,000 Again, this excludes lost production. For a manufacturer waiting for critical raw material, the indirect cost can easily exceed the physical logistics bill. Delay 7: Customs Examination or Technical Verification Not every dangerous-goods shipment is physically examined. Customs examination is risk-based. A shipment may be facilitated through the normal Risk Management System or selected for examination, scanning, sampling or additional technical verification. Hazardous chemicals may sometimes require more information on composition or end use. If samples need to be drawn for testing, the release timeline can extend. This is why a fixed &#8220;10-20% inspection rate&#8221; should not be presented as a universal DG statistic. The treatment of a shipment can depend on the importer profile, commodity, HS classification, documentation and regulatory controls. Importers should plan some contingency time rather than assume that every DG shipment will follow exactly the same process. Delay 8: Out of Charge Is Granted but the Cargo Still Does Not Move Out of Charge is an important Customs milestone. But it is not the same as final delivery. After Customs clearance, the importer may still need carrier release, terminal clearance, DG handling settlement, container availability and a suitable transporter. If the truck is not ready, the cargo can remain at the terminal after Customs has already finished its part. This creates an important performance distinction. Businesses should track not only Customs release time but also total port-to-factory movement time. That is the number that affects production planning. Case Study 4: DG Truck Not Available After Clearance A DG shipment was expected to receive Out of Charge on Wednesday. The importer had arranged a DG-compliant vehicle for Wednesday afternoon. A Customs query moved release to Friday. The original vehicle was no longer available. A replacement DG vehicle cost an additional: \u20b920,000 Two extra days of terminal exposure at an illustrative: \u20b910,000 per day added another: \u20b920,000 Total direct impact: \u20b940,000 The Customs query itself did not create a direct fee. The cost came from everything around it. What Does a DG Import Delay Actually Cost? For dangerous goods, delay cost is rarely one simple demurrage line. It can include terminal storage, container detention, additional DG handling, document amendment, carrier administration, truck rescheduling, relabelling, rebooking and emergency replacement freight. Delay Cost Typical Reason Terminal Storage Cargo remains beyond free period Detention Container retained longer DG Handling Special hazardous cargo procedures Document Amendment Incorrect declaration Carrier Administration DG reapproval Truck Rescheduling Clearance date changes Repacking \/ Relabelling DG preparation incorrect Rebooking Vessel or flight missed Expedited Freight Replacement cargo becomes urgent Production Loss Material reaches factory late A broad \u20b97,000 to \u20b915,000 per day range can be useful only as a planning illustration for storage or detention. Actual DG charges can be lower or substantially higher depending on the port, airport, carrier, cargo class, container type, free time and duration. How a Three-Day Delay Can Become \u20b950,000 Take a simple example. Storage and detention: \u20b910,000 x 3 days = \u20b930,000 Document correction: \u20b95,000 DG transporter rescheduling: \u20b915,000 Total: \u20b950,000 For a \u20b925 lakh cargo shipment, \u20b950,000 may appear manageable. But if the same shipment is feeding a manufacturing line worth several lakhs of rupees per day in output, the real business impact is very different. This is why DG clearance should be managed as a supply-chain risk rather than just a Customs task. How to Avoid DG Import Delays Before Shipment The best way to reduce DG delays is to move the compliance work earlier. 7-10 Days Before Shipment Confirm the exact product identity, HS code, SDS, UN number, DG class and any applicable Indian regulatory requirement. 5-7 Days Before Shipment Submit technical and DG documents to the airline or shipping line and obtain acceptance. Do not assume approval simply because the same product moved on another carrier previously. 2-3 Days Before Departure Compare the invoice, packing list, DG declaration and Bill of Lading or AWB instructions. Make sure product descriptions are consistent. Before Arrival in India Prepare the Bill of Entry data and all supporting documents. Resolve likely classification or regulatory questions wherever possible before arrival. Before Customs Release Confirm DG transporter availability, terminal procedures and consignee delivery readiness. This prevents the cargo from sitting at the terminal after Out of Charge. Air Freight vs Sea Freight for Dangerous Goods Air freight is usually faster, but dangerous goods only benefit from that speed if the airline accepts the shipment correctly. An air shipment rejected because of the wrong classification, packaging or documentation can lose the entire time advantage. Air freight is therefore generally more suitable for urgent, smaller and high-value DG cargo that meets airline requirements. Sea freight is often more practical for larger industrial quantities. It may offer more flexibility for volume, but the cargo still needs correct IMDG classification, carrier approval and port acceptance. Factor DG Air Freight DG Sea Freight Transit Faster Longer Acceptance Usually stricter Often more practical for volume Main Framework IATA DGR IMDG Main Delay Risk Airline rejection\/cut-off Carrier\/terminal approval Best For Urgent, smaller DG cargo Larger industrial quantities The right mode should therefore be selected after DG classification and carrier review, not before. What Regular DG Importers Should Measure Companies that import chemicals, batteries or other dangerous goods every month should track more than freight rate. A useful KPI dashboard can include: KPI What It Shows Carrier DG Approval Time Pre-shipment readiness First-Time Document Acceptance Documentation quality Customs Release Hours Clearance efficiency Storage Days Delay exposure DG Booking Rejection Rate Classification quality Truck Rescheduling Rate Destination planning Door-to-Door Transit Time Overall supply-chain reliability The financial impact can become meaningful. Suppose a company imports 20 DG shipments per month. If better documentation eliminates just one unnecessary storage day per shipment and the illustrative exposure is \u20b910,000 per day: 20 x \u20b910,000 = \u20b92 lakh per month Over 12 months: \u20b924 lakh That is why disciplined DG documentation can create measurable commercial savings. Role of a Freight Forwarder in Preventing DG Delays A freight forwarder&#8217;s role should start before the booking is made. For air freight, this means checking airline acceptance, dangerous-goods documentation and airport cut-offs. For sea freight, it includes shipping-line approval, IMDG documentation, equipment planning and terminal coordination. For Customs clearance, the Bill of Entry should align with the commercial and technical documentation. Door-to-door delivery then connects Customs release with compliant inland transportation. Warehousing may be required when approved DG storage is needed. Project cargo coordination can also become relevant where dangerous goods form part of a larger industrial shipment. Cargo People&#8217;s air freight, sea freight FCL\/LCL, Customs clearance, door-to-door delivery, warehousing and project cargo capabilities can therefore be coordinated as one movement rather than treated as separate services. For importers, the main objective is simple: reduce the number of points where documentation changes hands without being checked. Practical Decision Guide for Importers Before a DG shipment leaves origin, management should be able to answer five questions confidently. Is the SDS for the exact product being shipped? Is the UN number and DG classification correct? Has&#8230;<\/p>\n","protected":false},"author":2,"featured_media":1646,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1007],"tags":[1003,1004,1006,999,1005],"class_list":["post-1645","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-dangerous-goods-import-clearance-india","tag-dangerous-goods-import-clearance-india","tag-dg-cargo-customs-clearance-process","tag-dg-cargo-import-delays","tag-dg-customs-clearance-india","tag-hazardous-goods-import-clearance-india"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.1 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs<\/title>\n<meta name=\"description\" content=\"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs\" \/>\n<meta property=\"og:description\" content=\"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/\" \/>\n<meta property=\"og:site_name\" content=\"Cargo People Blogs\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T05:55:50+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-16T05:55:51+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1317\" \/>\n\t<meta property=\"og:image:height\" content=\"689\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Shikha Roy\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Shikha Roy\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/\"},\"author\":{\"name\":\"Shikha Roy\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#\\\/schema\\\/person\\\/58f6aac19425a05166ab6ff60ac87d2c\"},\"headline\":\"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them\",\"datePublished\":\"2026-11-16T05:55:50+00:00\",\"dateModified\":\"2026-11-16T05:55:51+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/\"},\"wordCount\":3365,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg\",\"keywords\":[\"Dangerous goods import clearance India\",\"DG cargo customs clearance process\",\"DG cargo import delays\",\"DG customs clearance India\",\"hazardous goods import clearance India\"],\"articleSection\":[\"Dangerous Goods Import Clearance India\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/\",\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/\",\"name\":\"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg\",\"datePublished\":\"2026-11-16T05:55:50+00:00\",\"dateModified\":\"2026-11-16T05:55:51+00:00\",\"description\":\"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#primaryimage\",\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg\",\"contentUrl\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg\",\"width\":1317,\"height\":689,\"caption\":\"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/dangerous-goods-import-clearance-india\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/\",\"name\":\"Cargo People Blogs\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#organization\",\"name\":\"Cargo People Blogs\",\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/cargo-logo.png\",\"contentUrl\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/cargo-logo.png\",\"width\":399,\"height\":159,\"caption\":\"Cargo People Blogs\"},\"image\":{\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/#\\\/schema\\\/person\\\/58f6aac19425a05166ab6ff60ac87d2c\",\"name\":\"Shikha Roy\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g\",\"caption\":\"Shikha Roy\"},\"url\":\"https:\\\/\\\/cargopeople.com\\\/blog\\\/author\\\/shikha-roy\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs","description":"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/","og_locale":"en_US","og_type":"article","og_title":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs","og_description":"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.","og_url":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/","og_site_name":"Cargo People Blogs","article_published_time":"2026-11-16T05:55:50+00:00","article_modified_time":"2026-11-16T05:55:51+00:00","og_image":[{"width":1317,"height":689,"url":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg","type":"image\/jpeg"}],"author":"Shikha Roy","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Shikha Roy","Est. reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#article","isPartOf":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/"},"author":{"name":"Shikha Roy","@id":"https:\/\/cargopeople.com\/blog\/#\/schema\/person\/58f6aac19425a05166ab6ff60ac87d2c"},"headline":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them","datePublished":"2026-11-16T05:55:50+00:00","dateModified":"2026-11-16T05:55:51+00:00","mainEntityOfPage":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/"},"wordCount":3365,"commentCount":0,"publisher":{"@id":"https:\/\/cargopeople.com\/blog\/#organization"},"image":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#primaryimage"},"thumbnailUrl":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg","keywords":["Dangerous goods import clearance India","DG cargo customs clearance process","DG cargo import delays","DG customs clearance India","hazardous goods import clearance India"],"articleSection":["Dangerous Goods Import Clearance India"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/","url":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/","name":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them - Cargo People Blogs","isPartOf":{"@id":"https:\/\/cargopeople.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#primaryimage"},"image":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#primaryimage"},"thumbnailUrl":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg","datePublished":"2026-11-16T05:55:50+00:00","dateModified":"2026-11-16T05:55:51+00:00","description":"Learn why dangerous goods import clearance in India gets delayed, what DG holds can cost, and how importers can prevent Customs and carrier issues.","breadcrumb":{"@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#primaryimage","url":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg","contentUrl":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/11\/Cargo-People-Dangerous-Goods-Clearance_11zon.jpg","width":1317,"height":689,"caption":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them"},{"@type":"BreadcrumbList","@id":"https:\/\/cargopeople.com\/blog\/dangerous-goods-import-clearance-india\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/cargopeople.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Dangerous Goods Import Clearance India: Common Delays and How to Avoid Them"}]},{"@type":"WebSite","@id":"https:\/\/cargopeople.com\/blog\/#website","url":"https:\/\/cargopeople.com\/blog\/","name":"Cargo People Blogs","description":"","publisher":{"@id":"https:\/\/cargopeople.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/cargopeople.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/cargopeople.com\/blog\/#organization","name":"Cargo People Blogs","url":"https:\/\/cargopeople.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/cargopeople.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/07\/cargo-logo.png","contentUrl":"https:\/\/cargopeople.com\/blog\/wp-content\/uploads\/2026\/07\/cargo-logo.png","width":399,"height":159,"caption":"Cargo People Blogs"},"image":{"@id":"https:\/\/cargopeople.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/cargopeople.com\/blog\/#\/schema\/person\/58f6aac19425a05166ab6ff60ac87d2c","name":"Shikha Roy","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/9ae207942422579a0cd3ce95b6ff2612cd29c5d2820e087a4281483c4575f888?s=96&d=mm&r=g","caption":"Shikha Roy"},"url":"https:\/\/cargopeople.com\/blog\/author\/shikha-roy\/"}]}},"_links":{"self":[{"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/posts\/1645","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/comments?post=1645"}],"version-history":[{"count":1,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/posts\/1645\/revisions"}],"predecessor-version":[{"id":1647,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/posts\/1645\/revisions\/1647"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/media\/1646"}],"wp:attachment":[{"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/media?parent=1645"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/categories?post=1645"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cargopeople.com\/blog\/wp-json\/wp\/v2\/tags?post=1645"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}